Effect of Warm Air Drying on Micro-tensile Bond Strength of Resin Cement with Total-etch Adhesive System to Root Canal Dentin at Different Levels
The purpose of this study was to evaluate the effects of warm air drying on micro-tensile bond strength to root canal dentin of resin cement with total-etch adhesive system at different levels. Ten single-canal lower premolars were cut perpendicular to long axis at cementoenamel junction level and were prepared post space for FibreKleerTM fiber post set for 10 mm. Root canal surface was bonded with a total-etch adhesive (OptibondTM Solo Plus). Solvents were evaporated using air-drying with temperature of 20°C or 38°C. Fiber posts were cemented with resin cement Nx 3 NexusTM. After storage in water for 24 h at 37°C, the roots were sectioned transversely into 6 discs. Three discs were obtained from the coronal and apical levels. Specimens were trimmed to obtain hourglass shapes with a bond area of 1.0 ±0.1 mm2 for microtensile bond strength test. Data were analyzed by two-way ANOVA and Tukey’s test (p<0.05). Increasing the air-drying temperature did not significantly influence the bond strength of the resin cement with total-etch adhesive system. Coronal root region presented significantly higher bond strength than the apical region.
Skupien JA, Sarkis-Onofre R, Cenci MS, et al. A systematic review of factors associated with the retention of glass fiber posts. Braz Oral Res 2015; 29(1): 1-8
Pereira JR, da Rosa RA, do Valle AL, et al. The influence of different cements on the pull-out bond strength of fiber posts. J Prosthet Dent 2014; 112(1): 59-63.
Juloski J, Fadda GM, Radovic I, et al. Push-out bond strength of an experimental self-adhesive resin cement. Eur J Oral Sci 2013; 121(1): 50-56.
Nunes TG, Garcia FC, Osorio R, et al. Polymerization efficacy of simplified adhesive systems studied by NMR and MRI techniques. Dent Mater 2006; 22(10): 963-972.
Reis A, Klein-Júnior CA, de Souza FH, Stanislawczuk R, et al. The use of warm air stream for solvent evaporation: effects on the durability of resin-dentin bonds. Oper Dent 2010; 35(1): 29-36.
Ikeda T, De Munck J, Shirai K, et al. Effect of evaporation of primer components on ultimate tensile strengths of primer–adhesive mixture. Dent Mater 2005; 21(11): 1051-1058.
Wang Y, Spencer P. Hybridization efficiency of the adhesive/dentin interface with wet bonding. J Dent Res 2003; 82(2): 141-145.
Yiu CK, Pashley EL, Hiraishi N, et al. Solvent and water retention in dental adhesive blends after evaporation. Biomaterials 2005; 26(34): 6863-6872.
Van Meerbeek B, De Munck J, Yoshida Y, et al. Adhesion to enamel and dentin: current status and future challenges. Oper Dent 2003; 28(3): 215-235.
Tay FR, King NM, Chan KM, et al. How can nanoleakage occur in self-etching adhesive systems that demineralize and infiltrate simultaneously? J Adhes Dent 2002; 4(4): 255-269.
Marsiglio AA, Almeida JC, Hilgert LA, et al. Bonding to dentin as a function of air-stream temperatures for solvent evaporation. Braz Oral Res 2012; 26(3): 280-287.
Proença JP, Polido M, Osorio E, et al. Dentin regional bond strength of self-etch and total-etch adhesive systems. Dent Mater 2007; 23(12): 1542-1548.
Yoshiyama M, Carvalho RM, Sano H, et al. Regional bond strengths of resins to human root dentine. J Dent 1996; 24(6): 435-442.
Farina AP, Cecchin D, Garcia Lda F, Naves LZ, et al. Bond strength of fiber posts in different root thirds using resin cement. J Adhes Dent 2011; 13(2): 179-186.
Calixto LR, Bandéca MC, Clavijo V, et al. Effect of resin cement system and root region on the push-out bond strength of a translucent fiber post. Oper Dent 2012; 37(1): 80-86.
Zortuk M, Bolpaca P, Kilic K, et al. Effects of finger pressure applied by dentists during cementation of all-ceramic crowns. Eur J Dent 2010; 4(4): 383-388.
Bouillaguet S, Troesch S, Wataha JC, et al. Microtensile bond strength between adhesive cements and root canal dentin. Dent Mater 2003; 19(3): 199-205.
Raymond Chang, Chemistry ,10th ed. McGraw – Hill: New York; 2010: 489-499.
Klein-Júnior CA, Zander-Grande C, Amaral R, et al. Evaporating solvents with a warm air-stream: effects on adhesive layer properties and resin–dentin bond strengths. J Dent 2008; 36(8): 618-625.
Reis A, Wambier L, Malaquias T, et al. Effects of warm air drying on water sorption, solubility, and adhesive strength of simplified etch-and-rinse adhesives. J Adhes Dent 2013; 15(1):41-46
Shiratsuchi K, Tsujimoto A, Takamizawa T, et al. Influence of warm air drying on enamel bond strength and surface free energy of self-etch adhesives. Eur J Oral Sci 2013; 121(4): 370-376.
Garcia FC, Almeida JC, Osorio R, et al. Influence of drying time and temperature on bond strength of contemporary adhesives to dentine. J Dent 2009; 37(4): 315-320.
Allen JD, Breeding LC, Pashley DH. Effect of warm air on the shear bond strength of composite resins. Quintessence Int 1992; 23(4): 289-296.
Thitthaweerat S, Nakajima M, Foxton RM, et al. Effect of solvent evaporation strategies on regional bond strength of one‐step self‐etch adhesives to root canal dentine. Int Endod J 2013; 46(11): 1023-1031.
Kim Y1, Kim MR, Kim SJ. Iatrogenic pneumomediastinum with extensive subcutaneous emphysema after endodontic treatment: report of 2 cases. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2010; 109(2): 114-119.
Eleazer PD1, Eleazer KR. Air pressures developed beyond the apex from drying root canals with pressurized air. J Endod 1998; 24(12): 833-836.
Mallmann A, Jacques LB, Valandro LF, et al. Microtensile bond strength of light-and self-cured adhesive systems to intraradicular dentin using a translucent fiber post. Oper Dent 2005; 30(4): 500-506.
Asawaworarit, W, Malhotra, W. Microtensile bond strength of resin cement to surface-treated root-canal and glass fiber posts. Mahidol Dent J 2008; 28: 325-332.
Aksornmuang J, Foxton RM, Nakajima M, et al. Microtensile bond strength of a dual cure resin core material to glass and quartz fibre posts. J Dent 2004; 32: 433-50.
Aksornmuang J, Nakajima M, Foxton RM, et al. Regional bond strengths of a dual-cure resin core material to translucent quartz fiber post. Am J Dent 2006; 19: 51-5.
Asawaworarit W, Piyawattanataworn W, Senawongse P. The microtensile bond strength of resin composite core and fiber post after surface treatment with 4% hydrofluoric acid. Mahidol Dent J 2010; 30: 153-62.
Vano M , Goracci C, Monticelli F, et al. The adhesion between fibre posts and composite resin cores: the evaluation of microtensile bond strength following various surface chemical treatments to posts. Int Endod J 2006; 39: 31-39.
Mjör IA, Smith MR, Ferrari M, et al. The structure of dentine in the apical region of human teeth. Int Endod J 2001; 34(5): 346-353.
Ferrari M , Mannocci F, Vichi A, et al. Bonding to root canal: structural characteristics of the substrate. Am J Dent 2000; 13(5): 255-260.
Ferrari M, Vichi A, Grandini S. Efficacy of different adhesive techniques on bonding to root canal walls: an SEM investigation. Dent Mater 2001; 17(5): 422-429.
Gwinnett AJ. Quantitative contribution of resin infiltration/hybridization to dentin bonding. Am J Dent 1993; 6(1): 7-9.
Kurtz JS, Perdigão J, Geraldeli S, et al. Bond strengths of tooth-colored posts, effect of sealer, dentin adhesive, and root region. Am J Dent 2003; 16: 31-36.
Foxton RM, Nakajima M, Tagami J, et al. Bonding of photo and dual-cure adhesives to root canal dentin. Oper Dent 2003; 28(5): 543-551.
Dos Santos Alves Morgan LF, Peixoto RT, de Castro Albuquerque R, et al. Light transmission through a translucent fiber post. J Endod 2008 ;34(3): 299-302.
Khuwuthayakorn Y, Cherdsatirakul P, Pichetshote K. Effect of Warm Air Drying on Micro-tensile Bond Strength of Resin Cement with Total-etch Adhesive System to Root Canal Dentin at Different Levels: Original articles. CM Dent J [Internet]. 2017 Sep 01 [cited 2024 Nov 18];38(3):59-66. Available from: https://www.dent.cmu.ac.th/cmdj/frontend/web/?r=site/viewarticle&id=139
Khuwuthayakorn, Y., Cherdsatirakul, P. & Pichetshote, K. (2017). Effect of Warm Air Drying on Micro-tensile Bond Strength of Resin Cement with Total-etch Adhesive System to Root Canal Dentin at Different Levels. CM Dent J, 38(3), 59-66. Retrieved from: https://www.dent.cmu.ac.th/cmdj/frontend/web/?r=site/viewarticle&id=139
Khuwuthayakorn, Y., Cherdsatirakul Piriya and Pichetshote Kasarb. 2017. "Effect of Warm Air Drying on Micro-tensile Bond Strength of Resin Cement with Total-etch Adhesive System to Root Canal Dentin at Different Levels." CM Dent J, 38(3), 59-66. https://www.dent.cmu.ac.th/cmdj/frontend/web/?r=site/viewarticle&id=139
Khuwuthayakorn, Y. et al. 2017. 'Effect of Warm Air Drying on Micro-tensile Bond Strength of Resin Cement with Total-etch Adhesive System to Root Canal Dentin at Different Levels', CM Dent J, 38(3), 59-66. Retrieved from https://www.dent.cmu.ac.th/cmdj/frontend/web/?r=site/viewarticle&id=139
Khuwuthayakorn, Y., Cherdsatirakul, P. and Pichetshote, K. "Effect of Warm Air Drying on Micro-tensile Bond Strength of Resin Cement with Total-etch Adhesive System to Root Canal Dentin at Different Levels", CM Dent J, vol.38, no. 3, pp. 59-66, Sep. 2017.
Khuwuthayakorn Yutthana, Cherdsatirakul Piriya, Pichetshote Kasarb "Effect of Warm Air Drying on Micro-tensile Bond Strength of Resin Cement with Total-etch Adhesive System to Root Canal Dentin at Different Levels." CM Dent J, vol.38, no. 3, Sep. 2017, pp. 59-66, https://www.dent.cmu.ac.th/cmdj/frontend/web/?r=site/viewarticle&id=139